GermanLook Forums - Exess toe out with 944 alloy arms

GermanLook Forums (https://www.germanlook.net/forums/index.php)

- Suspension (https://www.germanlook.net/forums/forumdisplay.php?f=12)

- - Exess toe out with 944 alloy arms (https://www.germanlook.net/forums/showthread.php?t=11139)

It's a very small world, i own LBH 165H - mr bbig owns LBH 166H !!!!!

high tensile might be better for the adjuster bolts mate...but put me down for a set.

Quote:

Originally Posted by Turbonutta (Post 83558)

:lmao: small world MR BIG didnt you buy the rear brakes of me when i was in wycombe...:rolleyes:

Very possibly? Where did you live? Or what was your real name? :) I did live in Wycombe for 18 years!!

Quote:

Originally Posted by dub_crazee (Post 83568)

It's a very small world, i own LBH 165H - mr bbig owns LBH 166H !!!!!

high tensile might be better for the adjuster bolts mate...but put me down for a set.

If you ever fancy selling the reg plate matey you know who to call ;)

My bugs in a million bits now....im trial fitting my ally arms, i have removed the wings, all the metal arms etc.

im looking to make a sleeve in delrin to slip in a urathane bush and hold the spring plate off by 6mm ish as i have read others have used spacers to get past the large bolt head on the spring plate (is welding it an option i thought it a bad idea on a spring plate?)
its hard to tell if the toe is an issue, i have taken a bit off the rear springplate bolt holes to allow me to slide the arm forward more if needed.

i dont seem to have the springplate flex either and im considering spacing the 944 cover off 6mm also. i had one large washer inboard on the alloy arm

i didnt even think of handbrake cables.....i presumed my ones would fit, silly me when will i learn.doh another issue, i had the existing ones made up so i guess i will have to get some more..