Porsche code ?
What offset is a 928-361-616-00 rim, phone dial? Thanks for the info.
Isn't the offset usually stamped on the rim somewhere? JR |
It is usually displayed as ET40 or ET50 ect...
|
Any help here, I need to know, the sooner the better. I thought they would be 23 or 52, not 40 or 50? Any help though would be great..Thanks JR
|
Boy sorry if you where just using that as an example........
|
JR, you working on some other rims also?
they should have an et52.3 or et23 for phone dials. |
Quote:
|
I have the same wheels 16x7 phone dials
i did some measureing yesterday on my wheels 6 5/16" backspacing or 160mm and if my measurements were good offset is 2.4375" or about 62mm |
they are 928 rims look in a reference for 928 wheel et for the same width and diameter wheel they did not chage them that much
if thats a help i have some 7" x 16" 928 gullidecks (flat face with a slot cut out) the ET is 65 search 928 rims on the net.. :confused: |
The only listing that I can find for that part number has a "-85" under remarks. This may or may not be the ett of the wheel.
Try a search on the web? Good luck, Dave |
All times are GMT -4. The time now is 12:58. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
© www.GermanLook.net 2002-2017. All Rights Reserved