GermanLook Forums

GermanLook Forums (https://www.germanlook.net/forums/index.php)
-   Wheels (https://www.germanlook.net/forums/forumdisplay.php?f=63)
-   -   boxster s wheels' center bore too small for 944 NA brakes? (https://www.germanlook.net/forums/showthread.php?t=8368)

davetaylor February 21st 2007 15:54

boxster s wheels' center bore too small for 944 NA brakes?
 
i just tried to slip my boxster s wheels onto my 944 NA front end and the center bore on the wheels appears to be too small. am i missing something or is this indeed the case?

maybe i SHOULD have gone with mk4 stuff!

i don't want to enlarge the center bore because i want the porsche caps to fit. anyone have a remedy?

should i ask this in the wheel forum?

flat February 21st 2007 18:31

Wierd one. Af far as I now all Porsche wheels have the same wheel bore diameter, 71.5mm. See if you can get the wheel measured for the bore size.

Easy,
Lanner

davetaylor February 21st 2007 18:36

i'll try to get them measured tomorrow by the people putting on my tires since i have no accurate way of doing it. if not, i'll take good pics to show what i'm talking about.

now i have to go take a portrait of an old lady (photo class).

davetaylor February 23rd 2007 18:46

i talked to russ at oldspeed and he said he believes some porsche wheels had different center bores. that's probably true, since if anyone were to find the one kind of incorrect wheels out there it'd be me. :rolleyes:

can anyone verify that this is true?

here they are, and check out the ones that came on my sweet ride :cool:

http://i91.photobucket.com/albums/k2...6.jpg~original

davetaylor February 28th 2007 15:09

i couldn't bolt these up until today when i got my lug nuts, but here's what i'm looking at:

http://i91.photobucket.com/albums/k2...7.jpg~original

i'm pretty ignorant about 944 stuff, but doesn't this have to be a center bore issue? if i use spacers i'll run out of stud because i only get 5 turns at this point.

if i machine the wheels they might not take the center caps, and if i machine the hubs they won't be hub centric to any normal porsche wheels.

any advice?

wrenchnride247 February 28th 2007 21:55

This may be a long shot, but have you tried asking a Porsche dealership about different hubcentric bores?

P.S. DON'T tell them it's going on a VW use the year 944 suspension you got, and tell them what year and model you got the new wheels from.

flat February 28th 2007 22:02

Find someone with a set of calipers. Then we can talk numbers.

Lanner

wrenchnride247 February 28th 2007 22:06

Quote:

Originally Posted by flat (Post 57451)
Find someone with a set of calipers. Then we can talk numbers.

Lanner

????? wrong thread?:confused:

davetaylor February 28th 2007 22:12

Quote:

Originally Posted by flat (Post 57451)
Find someone with a set of calipers. Then we can talk numbers.

Lanner

he means calipers for measuring stuff. and yeah, i was talking my friend about that tonight. if i can pick up a cheap set i'm going to measure it up tomorrow and see what i come up with. if these don't go straight on somehow i'll be wheel shopping.

wrenchnride247 February 28th 2007 22:15

Oh, sorry. my bad :o . I thought you had NA calipers.

flat February 28th 2007 22:30

Yeah, I mean measuring calipers.

Lanner

davetaylor February 28th 2007 22:46

do we know that the hub on all 944 NAs are 71.5 or 71.6, whatever the number is?

davetaylor February 28th 2007 22:52

Quote:

Originally Posted by wrenchnride247 (Post 57449)
This may be a long shot, but have you tried asking a Porsche dealership about different hubcentric bores?

P.S. DON'T tell them it's going on a VW use the year 944 suspension you got, and tell them what year and model you got the new wheels from.


and i haven't asked a dealer yet because i've never talked to anyone at any dealer who knew anything. the last guy at a vw dealership got confused when i called my jetta a mark4. maybe porsche guys are better, but i don't expect much from my local dealers, no offense to them.

and i have been pretending it's just an april '85 944 just to save confusion on their end.

wrenchnride247 February 28th 2007 22:59

I'll measure my '87 hub's tomorrow. They have '95 993 wheels on them.

davetaylor February 28th 2007 23:02

cool, thanks. by the way, you're not close to bowling green or nashville, are you?

wrenchnride247 February 28th 2007 23:05

20 miles north of Chattanooga...

davetaylor February 28th 2007 23:18

Quote:

Originally Posted by wrenchnride247 (Post 57462)
20 miles north of Chattanooga...

k, so not super close. looks like about 3.5 hours from bowling green.

flat March 1st 2007 20:07

Quote:

Originally Posted by davetaylor (Post 57458)
do we know that the hub on all 944 NAs are 71.5 or 71.6, whatever the number is?

Yes. 71.5mm to be exact. All 944 hubs are the same wheel bore. I have 993 cups 2's on my 944NAs on my bus and everything is lovely. If they changed the wheel bore, they did it after the 993's. Also, are we sure it's a diameter problem and not a depth problem?

Lanner

wrenchnride247 March 1st 2007 22:37

Well, since Lanner gave you the measurement... I don't have to jack up my car and remove a wheel to measure.(thanks Lanner :) )

davetaylor March 1st 2007 23:11

Quote:

Originally Posted by flat (Post 57483)
Yes. 71.5mm to be exact. All 944 hubs are the same wheel bore. I have 993 cups 2's on my 944NAs on my bus and everything is lovely. If they changed the wheel bore, they did it after the 993's. Also, are we sure it's a diameter problem and not a depth problem?

Lanner

one could maybe call it a depth problem. here's a picture of where it rubs:

http://i91.photobucket.com/albums/k2...3.jpg~original

so the bore is fine until it hits at that point, i guess.

LLVWGL March 2nd 2007 00:50

maybe you could just mill the centering ring down a bit? My 993 cup II fit like a glove!, maybe the later car had a shorter centering ring. :confused:


BTW, a set of cheap dial calipers can't cost more than $10 at harbor freight, that way you can tell the machine shop exactly what you need milled off. Besides, they are so handy!

davetaylor March 2nd 2007 09:50

yeah, i don't have a harbor freight anywhere near me, but i'm going to try to pick up some when i get a free moment.

it appears that if i machine down the wheel center then the hub will stick through, but if i machine down the hub will have have an exposed bearing?


All times are GMT -4. The time now is 21:32.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
© www.GermanLook.net 2002-2017. All Rights Reserved