GermanLook Forums

GermanLook Forums (https://www.germanlook.net/forums/index.php)
-   Brakes (https://www.germanlook.net/forums/forumdisplay.php?f=62)
-   -   Master cylinder sizes (https://www.germanlook.net/forums/showthread.php?t=11754)

SuperRSi May 17th 2014 14:03

Master cylinder sizes
 
I am putting an OBP pedal setup in my car and wanted some recommendations on master sizes for front rear and Trans hydraulic actuation. I should know the answers but 10 years of building this thing has blurred many lines...

Thanks guys!

SuperRSi May 17th 2014 14:03

Oops using Boxster S calipers front and rear. Have not purchased Trans slave yet.

NO_H2O May 18th 2014 09:09

I know Tilton has a worksheet for their products. OBP may have one for theirs.

ricola May 18th 2014 15:04

I'm using 0.625s for my 996 brakes which is the smallest available and I would go smaller if I could... I have 0.75 for the clutch but that is dependant on what size slave, clutch etc you are running...


All times are GMT -4. The time now is 10:47.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
© www.GermanLook.net 2002-2017. All Rights Reserved