GermanLook Forums - Are 914 gauges same connections as a IV?

GermanLook Forums (https://www.germanlook.net/forums/index.php)

- Electrical (https://www.germanlook.net/forums/forumdisplay.php?f=34)

- - Are 914 gauges same connections as a IV? (https://www.germanlook.net/forums/showthread.php?t=4737)

kra710

August 18th 2004 09:18

Are 914 gauges same connections as a IV?

Ok as you know I have a 1977 transporter with a 2.0 L type IV, I was looking into installing all new guages and fabbing a plate out of aluminum. I like the 914 gauges but I am curious, Will they work with no modification as far as wiring is concerned? I guess this really will probably only apply to the fuel and speedo gauge, but since so may people have IV power Im sure you guys would know.

NO_H2O

August 18th 2004 10:08

My fuel gage is off, runs empty between 1/2 and 1/4. I fill up at 1/2. I did see someone replace the indicator inside the Porsche case with a VW indicator using some epoxy.

kra710

August 18th 2004 18:56

but as far as the other connections its bolt on? If thats the case I can just make a bezel and install them?

boygenius

August 18th 2004 19:14

Quote:

Originally Posted by NO_H2O

My fuel gage is off, runs empty between 1/2 and 1/4. I fill up at 1/2. I did see someone replace the indicator inside the Porsche case with a VW indicator using some epoxy.

Check this thread for information.

http://www.germanlook.com/Forums/showthread.php?t=3716

All times are GMT -4. The time now is 16:55.