GermanLook Forums

GermanLook Forums (https://www.germanlook.net/forums/index.php)
-   Brakes (https://www.germanlook.net/forums/forumdisplay.php?f=62)
-   -   Best way to run a speedo cable w/Porsche brakes (https://www.germanlook.net/forums/showthread.php?t=11565)

DORIGTT December 1st 2012 18:54

Best way to run a speedo cable w/Porsche brakes
 
In looking at my spindle / brake / hub setup. I can barely fit the center cap of the wheel on which means a dust cap that will allow me to run the stock speedo cable is a pipe-dream.

Is this a case of narrow the beam then run spacers to get my track back but will allow me to put the dust caps on to get a speedo that works?

AAAAARRGGGHH!

NO_H2O December 2nd 2012 05:37

I had to dent the end of my bearing cap in to get the speedo cable to fit. Also had to sand the tip of the cable off a bit. There should be room to do both.

ricola December 2nd 2012 16:16

I cut a ring section of the cap out and welded it back together, no problems and plenty of clearance internally to the nut to do this..

KAFUR1 September 28th 2015 21:14

my 1985.5 944 set up
has a hole for the cable!


All times are GMT -4. The time now is 10:16.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
© www.GermanLook.net 2002-2017. All Rights Reserved