GermanLook Forums

GermanLook Forums (https://www.germanlook.net/forums/index.php)
-   Transmissions (https://www.germanlook.net/forums/forumdisplay.php?f=13)
-   -   Anyone have a 901 on the workbench? (https://www.germanlook.net/forums/showthread.php?t=11726)

owdlvr January 12th 2014 17:26

Anyone have a 901 on the workbench?
 
I'm hoping for two quick measurements:

I need to know the shift-shaft length from seal to end when the trans is in 2nd, and when the trans is in 3rd.

I can measure it roughly in my car, but it's not going to be easy!

-Dave

owdlvr January 13th 2014 19:50

GLI Autowerks to the rescue!

Selector shaft is 2.75" long from the seal when in 2nd gear. 3.75" long from the seal when in 3rd gear.

-Dave

jmd February 28th 2014 20:07

did you get everything you needed?
I've got mine out and can throw a tape around whatever you need.
jmd


All times are GMT -4. The time now is 14:36.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
© www.GermanLook.net 2002-2017. All Rights Reserved