Hi

Your doing excellent work, I'm taking the body off a 1303 soon so it can be painted, I'm glad that we don't have the same problems down here as you do there.

I might be seeing things but in the photo http://www.keversite.nl/fotoalbum/fotos/99903.jpg it looks like there is some sort bulge on the chassis floor at the rear end behind the seat rails, is this for something special or is it a piece of your bug puzzle waiting to be fitted?

Steve

Thanks Steve,

The bulge is made to fit the oilcooler, I think this will have plenty of airflow. Good luck with your car.
http://www.keversite.nl/fotoalbum/fotos/88898.jpg

Paul.

Nice work Paul! I don´t think I have ever seen anyone make such a big modification for an oil cooler! I like it!

This looks nice. No rear legroom, but who care! :D

No rear seat, so who cares :lmao:

Hi

Wow I never would have thought of doing that.

Steve

nice work well done :)

Slick I like! Hmmmm

Found some time to work on the car again 8)

The underside of the left doorpillar was bad, of course >:(
time for a Hoekie of Hooky :)
http://www.keversite.nl/fotoalbum/fotos/101713.jpg
http://www.keversite.nl/fotoalbum/fotos/101714.jpg

First I had to shorten it, this way the bracing could stay in it's place.
http://www.keversite.nl/fotoalbum/fotos/101715.jpg

fitting
http://www.keversite.nl/fotoalbum/fotos/101716.jpg

It only needs some welding. 8)
http://www.keversite.nl/fotoalbum/fotos/101719.jpg

Paul.

This morning it was time to finish the doorpillar.

Welded the hooky piece.
http://www.keversite.nl/fotoalbum/fotos/101822.jpg

Normally you can not reach the inside, mine is still open and it is double sheetmetal so I also welded the inside.
http://www.keversite.nl/fotoalbum/fotos/101823.jpg

Then I dismantled the door (this is very heavy with all the parts and glass in it) and checked the gap, I must say ; I am very pleased with it.
http://www.keversite.nl/fotoalbum/fotos/101824.jpg

Paul.

Awesome work Paul! keep update!! :)

Thanks, I am ill wright now but next week it is time to do some work again.

Paul.

Not much time lately, but still a Little progress.
This piece of the trunk was a little thin, also the holes didn't mach the new kick panel. so I replaced the top of the kick panel by a wider piece, this way I can close (weld) all the holes.
http://www.keversite.nl/fotoalbum/fotos/102726.jpg

http://www.keversite.nl/fotoalbum/fotos/102727.jpg

And all the holes are closed again. before paint I will put some lead filler on it and it will be as new again, offcourse I will do the corners first.

http://www.keversite.nl/fotoalbum/fotos/102880.jpg

Paul.

Paul where did you get the lower door post panel to buy.

Do you mean that green piece? It's a hooky piece, perfect fit.
http://www.hookyspanelshop.com

Paul.