set up help
have a 03 with 944 running gear,tca's are also rose jionted on the inner end.
running 7x16 front and 8x16 rear,type 4 motor,stripped out interor. looking for some base settings on front camber and castor also toe.what should i be running the camber and toe at? car is going to be used for sprints/hillclimbs and track days so needs to have very good turn in. not so importent stright line stabilty. was thinking along the lines of 3*front camber and no toe in/out.and 2-3 camber on the rear with teo in. any ideas? cheers rob |
Here are som links to the topic , good luck mr !
http://www.ozebiz.com.au/racetech/theory/align.html http://aircooled.net/gnrlsite/resour...s/handling.htm |
both links give good guides into what dose what,but what im after is a starting point,somthing to work from.was hoping someone who is still active in the kafer cup or simaler is out thare and is willing to help.
cheers rob |
All times are GMT -4. The time now is 09:58. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
© www.GermanLook.net 2002-2017. All Rights Reserved