GermanLook Forums

GermanLook Forums (https://www.germanlook.net/forums/index.php)
-   Transmissions (https://www.germanlook.net/forums/forumdisplay.php?f=13)
-   -   Trans choices (https://www.germanlook.net/forums/showthread.php?t=11859)

effvee March 13th 2016 20:23

Trans choices
 
Good morning boys and girls.:shocked:, well it would seem that I am all over the place. In the quest for a strong engine and trans combo, I believe that I am an obstacle to myself.

The only saving grace in this is, these choices are for the last bug, my keeper. I have said it before and I'll say it again; I have three supers.

I now have two stock VW trans, one automatic, one 915 struck between gears, one 901 and lastly the g50.

At one point, before the 915 came into the picture, I felt very strongly about the Berg 5 speed conversion. I still do for the sake of space.

I feel I can copy the ratios of the 915 or g50 in the Berg conversion. If the EZ-30 will fit only with a stock length of the VW; I will choose the Berg conversion. Again I'm all over the place.

Rancho says they can slightly mod the 3.44 r&p to adapt it to the Quaife ATB I have, it would look something like this.
http://i86.photobucket.com/albums/k9....jpeg~original

I have the Rhino case already and gusseted, I also have the Quaife.
There is an easy one inch space saving when you remove the front trans mounting point.
http://i86.photobucket.com/albums/k9...8.jpg~original
This mod will be done no matter which trans I choose. But the variable of the EZ-30 hunts me, my EZ-30 long block only came with case and heads. The timing chain housing did not come. I just don't know how to get closure to the fitment issue. I don't want to let this pass me by as far as installing it :o. The gold bug I keep on building it, it has two choices, 2110 or 2332. If I squint a little I can even see a type IV going into it. Because I also have three sets of type IV heads. Having the heads done is a positive thing toward cost of the type IV possibility. I also have the cylinders that I had made in 103's for the type IV. If I keep it simple I could buy J&E piston that EMW has in stock.

See there I go again, but for resale purposes saying that the engine had a type IV engine will aid in the sale:o. I know, I'll buy time and gain money to buy a EZ-30 by building the gold bug. The gold bug will have the 901 for its trans.
http://i86.photobucket.com/albums/k9...2.jpg~original


All times are GMT -4. The time now is 20:27.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
© www.GermanLook.net 2002-2017. All Rights Reserved