New twist on the classic "will it fit?"
I have a 74 Standard stock height. IF i go with...
Wheel Size: 17x7 Tire Size: 205/40 Wheel Offset: 42mm What width wheel spacers would i need to prevent knocking components inside the wheel/tire and WHat size widened fenders would i need to fit the wheels? I have tried the calculator mess but it just doesnt click in my brain. Also... would i be able to lower the car any without messing this all up? If so how much? Id appreciate as much help as you guys can give me |
1 Attachment(s)
I fitted the GT3 brake to a ball joint front end and had issues with the clearance between the calipers and the 17 inch wheels. Wheels are/were 996 BBS 7x17 50mm offset. I fitted a 2 inch narrowed beam and then added porsche 25 mm (1inch) wheel spacers. This cleared the calipers a little more and also gave more room on the inside of the wheel to the axle beam.
|
All times are GMT -4. The time now is 09:42. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
© www.GermanLook.net 2002-2017. All Rights Reserved