Items for sale to Boxer AG first, GL.com second
Guys,
I have some items for sale .. need to make some room in the garage. 1. 94mm T1 pistons/cylinders/ring/wrist pins - Mahle Metal Leve brand, new in box, 94mm forged pistons with coated skirts for an 82mm crank. This is a 94B set. 2. 928S4 front calipers with pads (80% remaining) - These are painted red and I was planning on using them on the rear of my beetle, but the current setup is fine. Pistons are 2 x 44mm, 2 x 38mm, made for a 304mm x 32mm disc. 3. 914 gearbox, converted for use in a beetle - This is my current gearbox and I have fixed first gear with new syncro rings and dog teeth. I've used swepco 201 in this gearbox. 4. T4 66mm crank with matching rods - polished and balanced, all is within spec, taken from a newly rebuilt 1.7L with about 200 kms on it. Rod bearings look almost new. 5. 914 215mm FW/PP and almost new 6 spring clutch disk - Reground and ready to use. The clutch disk has about 100 kms on it, good to 180 ft/lbs torque. 6. T4 71mm crank with matching rods - this is the 71mm crank in my current 2.0 turbo motor, polished and balanced, rods have ARP bolts. 7. T4 94mm cylinders, Original German - These measure slightly oversize for a 94mm piston, but would be fine to bore to 96mm. No broken fins. 8. T4 94mm pistons, original German - 914 2.0 USA spec. 9. T4 914 GA case - needs some TIG welding near an oil galley, not a big deal as I have fit an aluminum sleeve to bypass this location. I will update this post with prices tonight. I am open to trades incase they meet my requirements, and will leave this post up for 2 weeks and then will put it into the general 'For Sale' section. Thanks Sandeep |
Sandeep:
Give me a price on the T1 pistons. Greg |
Greg,
I just saw this post. I will send you an email tonight. Sandeep |
Sandeep,
I need to talk to you about your Turbo setup. Do you have pics of your intercooler and measurements? Alex |
How much for the gearbox, if its still available?
|
Timmy,
The gearbox is still available, I will send you a PM with the details. Alex, Shoot me an email with what you need and I will take the measurements and some pics. Sandeep |
Quote:
|
All times are GMT -4. The time now is 01:21. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
© www.GermanLook.net 2002-2017. All Rights Reserved