944 to 1303 hand brake assembly?
I purchased the Kerscher parts for the assembly of the emergency brake for the 944 conversion. Since the parts I got came from a 1985.5 944, I will be using the Al trailing arms.
I understand the 944 ends will have to replace the VW ones. Do I cut the VW cable as long as possible or do I have to determine correct length to cut? If that is the case, how do I determine the correct length? I don't understand how the tubes are used with the Al arms. Is this only needed on the steel trailing arms or how do I use them? Thanks for the help! |
As I remember correctly the E-brake parts from Kerscher are for the steel arms and not for the alloy arms. I know this because I've done this conversion myself. The easyest way to go is to purchase a e-brake kit from MBT in Germany. This kit is easy because you use the original VW e-brake cable, no cutting etc needed!! MBT also hase a special alloy sleeve for correcting the length of the VW cable to the Porsche e-brake parts. Good luck. :)
|
944 ebrake info
Do you have a link to the site where the 944 cable adapter is available ?
Any pictures of the parts or pricing would be a big help. Thanks Jim |
the webadress is: http://www.mbt-engineering.de/engineering/menu_e.htm
Photos from these parts are on the germanlook webpage under brake galleries :D :agree: photos. Greetings Stuart |
All times are GMT -4. The time now is 05:49. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
© www.GermanLook.net 2002-2017. All Rights Reserved