Resources for GL work in GTA
 

Hiya,

We should start a list of resources in the GTA for aircooled performance. What I'm suggesting is if you got any engine work done, where did you get it done ? How about redrilling your drums .. where did you get it done ?

Basically a list of shops where you got some work done that could be of value to other members of the club.

I will include this list on our club website. I'll have details of the site when we meet at Kars and Trucks on Mar 22nd.

So lets start here:

I got my 944 rear ebrake/hubs from WhaleTailCanada, in Kitchner. They were used and after I cleaned them up, worked fine.

I got my 993 Cup 2 replicas (FVD) (18x8.5, 18x10) from Tiremag in Thornhill.

Sandeep

->This is where i got my engine balanced. VERY good friend of mine. He also does a few stupid fast full blown V8's. Highly recomend Ang. Motor runs very smooth at idle (even with the 86c) and like silk at any RPM. Motor is SOLID mounted! i love it. PM me and i'll give you his cell#. Tell him Orange bug Pete (as many don't know my last name/he does) sent you.

Canadian Balancing
Scarborough
Angelo

The Kars and Trucks boys were sceptical about him. Gave him a small job and it turned out awesome. Now they use him for everything, including Steve's 3Rotor monster that will compete at the World Street Race.

-> Fiberglass
Good friend works out of his garage, known for his "flexable fiberglass". He does stuff like scoops, skirts for the ricer crowd. Give him a idea, or some sort of mold, and he can make it. Fits cars well as his fiberglass "flexes" not leaving voids from fiber being too stiff. PM me for cell #.
ohh...he's got a mold for a "W" decklid. Kars and trucks have it (stiff fiber), on their front engine bug. He (Dan) did some tweaking/modding my 911 shroud, to fit my Intakes/Superflo's. Etobicoke/Toronto.

-> Lanner at VDubCustoms for my 4x100 studding, while steering me towards fitting the 17's. Mississauga.

-> Metal Supermarket in Etobicoke on Norseman, East of Kipling
for all your raw metal needs. He's a VDub enthousiast with a blue standard bug. Where I/Kars N Truck get our metal.

-> Really good welder in a unit right behind the ^^Metal Supermarket. He's awesome with Aluminum. He put some extra fittings on my drysump tank.

-> Canadian Crank and Chrome (sp? i'll have to check)
for any "touchups/cleaning/polishing" cranks. East of the 400 and north of 401. Right beside the 400. Cleaned up some surface rust for me on a couple journals.

-> Quality Precision Crank
these guys will get down to the nitty gritty, to size/source, custom/proper bearings. i wouldn't use them for crank needs (couple stories). Use who's mentioned above^^. Etobicoke on Advance, East of Kipling.

-> Motex
for head work rebuilding. his reputation was great and out there. then the big racecar guys got ahold of him throwing cash. his workmanship is going downhill due to his developing big ego. beware. in Etobicoke.

-> Agostino Racing
V8 racecar guys. used them to "cut" my head to accept the K-800's. Pickering.

-> ME
for Parker hoses, fittings. Parker warehouse right around the corner from work. i get great prices.

-> Amsoil lubricants
Me. i'm a dealer. got the dealer thing for myself and friends. so if you want anything, my dealer cost to you ;) . i use their oil for the extended drain intervals. i'm lazy to change oil, as i drive alot. usually run 13-15K between changes. i just change the filter and "top up" at 6kish. sometimes don't.

375K on my '96 A4. motor runs like new, not burning anything, with same power.
490K on '89 74016V. still runs great.

'01 TDI as this motor is very picky on which oil to use. Amsoil has a oil, which is part of a small list. 100% synthetic, for Diesel use, CH-4 and VW 505 rated.

might try the 20W50 severe service in my bug. have been running Rotella T 10W40 mineral oil. thinking of going synthetic with turbo.


my questions are:
Sandeep, your "colour match paint" guy? (split crotch coolers)
where to source turbo "stuff" like wastegates, BOV's, and intercoolers?

This is off the top of my head. I could drive around when i'm bored, and get phone#'s/addresses. But, I should be finishing the split.

ohh.... there is this guy in Oakville........well that was a one time deal.... :D

Pete,

Thats quite a list ! Good to know.

My paint guy ...jees I don't even remember his name :eek: I will find out and edit this section. He has a blue '57 Split that he has restored so he knows bugs.

Lets not forget Marks Aircooled in Port Hope ... I'd like to get together before May and go see his 2.6L T4 .. he is also the only Canadian distributor for Aircooled Technology's parts.

Turbo parts hmmm .. I will try and find something. I've finally decided on a 1971cc T4 EFI turbo/crank fire ignition setup with Megasquirt as my engine for the short term so this will be interesting.

More to come.

Sandeep

Sandeep for your paint was it Paul from Phoenix ?

Jamie

short term?

Thanks Jamie !

Paul from Phoenix Custom Autobody in Brampton.

SAndeep

Ya ... for this year. I have the funds to order a MS setup along with the Ford EDIS system (crank fired coil pack). I have discussed an intake system with Lanner, similar to a Carrera 3.2 intake, but instead of 6 runners, only 4, with a TB in the middle.

Turbo will be from Ebay most likely and will stay with 5-8 psi with my stock 2.0 T4.

Will run this setup for a year to get used to it and then beef up the parts, but keep displacement about the same and run more boost :D

Sandeep

cool,

i'd be interested in the intake setup. i'll have to call him. i've got a nice rajay turbo for you :agree:

where in Brampton is the paint/body shop?

Paul of Phoenix Custom Autobody in Brampton

On East Drive, Beside J.A. Towing
(east of kennedy rd near the intersection of Kennedy and Queen)

He painted my ghia and is a friend of my neighbour.

Jamie

I'm interested in getting this guys info. Would like to chat to him to see if he could build a rad shroud for me, and how much it would cost.

Thanks,

Rob.

PM sent,

I was thinking of you when i typed that :agree:

Thanks sandeep for the plug :D

2 sets of nickies sitting here :cool:
Massive and DTM authorized Canadian dealer

Engines T1, T4 and T4 into T1 stock and hipo
Head welding
Full paint and resto services
Powder coating
Mods
Parts
and more to come

not much of a site yet but:
www.marksaircooled.com

Just got my heads back, and everything looks "A" OK :agree:

I was listening to a someone that tried to screw him with some Porsche heads, that how i got the bad review.

Motex had originally freshened up the heads when they were pulled from the race car , and into my super in 2001. He was happy to see them again and treated me very well, with a turnaround time of 2 weeks, at a great price!

-welding
-machined
-lap the valves
-2 exhaust guides

Well, since i'm waiting for some parts from AC.net, and the work done mentioned above^^, i figured i'd get the heads flowed! :agree:

Took them to a shop that specializes in V8's. They have a Superflow 1200, bench/computer setup. Great service, 2nd day turnaround, fair price. Highly recommend!

J & J Performance Automotive
905-664-4785
251 Green Mountain Road East,
Stoney Creek, ON L8J 2Z5

High Performance Engines
Flow Bench & Engine Dyno Services
Racing Carburetors & Cylinder Heads

Got graphs of intake/exhaust CFM vs Valve lift. Spec sheet detailing at what RPM it will "run of of breath", est power per cylinder, optimum intake runner length, exhaust/intake CFM ratio, Potential flow vs Actual.

Tell them Pete with the ACVW heads reffered you, they will treat you right!

Greetings,

Sandeep thought it might be helpful for me to introduce myself to your group. My name is Scott Lyons and I run germansupply.com. We are an online and "bricks & mortar" VW aircooled specialist located in downtown Toronto. Since we specialize in bay window buses, we have lots of type 4 engine parts in stock. Also type 1 engine bits as well. We do engine building in house. I personally do all the engine assembly on every engine we build. We have a service facility also where I repair and restore only air-cooled VW's.

Sandeep is rebuilding or at least refreshing his engine and I was able to supply him with some quality engine internals. If anyone needs parts, please send me an email or call the telephone number on our contact page.

Me: for all of you custom, machining needs. Prototyping and small production work. I can open up your cylinder heads/flycut, open up the bores in cases. My rates are about HALF of what you'd expect elsewhere.....

Drop me a line!

Alex

Alex made a couple pieces for me, and they turned out great. :goodjob:


Local Anodizing shop:

Brimac Anodizing
542 Kipling Avenue,
Toronto, Ontario
M8Z 5E3
TELEPHONE: (416) 255-4411
FAX: (416) 255-3145

Was very happy with their anodizing work. Great service and price.



I'm looking for a Powdercoater......... Anyone know of any?


Pete

Thanks for the kind words Pete!:D

Try these guys for Powdercoating:

http://www.yellowpages.ca/bus/Ontari...&le=c53523c1ba

I got all my engine tin done by them a few years ago, very good product with fast turn around and good rates.

Alex

alex has done some machining for us also. fair price and fast turnaround.

as for brimac anodizing, i used to manufacture furniture, this is going back into the late 80's, and we used brimac then. their work was perfect, and it's good to see they're still in business.

Need to strip these crotch cooler flaps.

Have you guys used any media blasters around here? Wouldn't sandblasting pit the crap out of them?

Pete

Pete,

Glass bead at 40psi. My cabinet is currently not setup/opperational

Fishburn and Proctor on Steeles are your guys to see.

Alex

Thanks Alex,

Looked them up:

Fishburn Proctor Sandblasting & Painting

15479 Steeles Av E Hornby, L0P 1E0

(905) 878-1843

That's them!:)

Hi,
Although I've officially retired from the resto/engine biz I will still keep my hand in things though.
I can rebuild porsche 901 transmissions for a good price. With parts 3 day turn around. Two cores usually makes one transmission at low cost.
I've built 3 for myself, (technically I have a 914 rebuilt 901 sideshifter in stock) and I'm turning a 911-901 4 speed into a 5 speed right now.
If there's enought interest I'll build some VW trannies for the faithfull, maybe keep a couple in stock.
Any interest?

Fuel Injector rebuilders
 

My daily driver needs the fuel injectors rebuilt. Any recommendations for the GTA.

Jamie

Good idea Sandeep! I´m not sure if some of my list will help anyone outside of europe that much since freight costs usually kill unless it´s an exclusive part that isn´t offered in the U.S.

Engine 2320ccm TIV turbo:

Assembled by myself - all machine work done by www.remmelemotorsport.com
OEM case modified by www.remmelemotorsport.com
6x 13mm toolsteel through bolts - www.remmelemotorsport.com
Webcam 163 - webcam www.webcamshafts.com
Raceware headstud kit - Raceware http://raceware-fasteners.com/
Manton Pushrods - sourced from www.aircooledtechnology.com
Parkerized TIV mechnaical lifters - www.aircooledtechnology.com
Custom 102mm JE pistons - www.jepistons.com
102mm Deutz BF913 cylinders - www.deutz.com modified by myself and Remmele Motorsport www.remmelemotorsport.com
crank - stock 71mm
rods - stock Raceware bolts,balanced
main,rod and cam (doublethrust steel) bearings - www.aircooledtechnology.com
3.5kg 215mm flywheel - machine and balance work done by www.remmelemotorsport.com
Remmele Version 5 CU heads 47x39 (nimonic) - www.remmelemotorsport.com
Dry Sump Oil Pump - Custom/bespoke from Thorsten Pieper
356 T6 Aluminum Oilcooler adapter - www.remmelemotorsport.com
356 T6 aluminum Oilscreen cover - www.remmelemotorsport.com
CSP 45mm Python Exhaust Header - www.csp-shop.de modified for turbo (yet to be done by myself)
Garrett GT3071R turbo .63/.50 71mm stage 3 wheel 4" inlet - www.atp-turbo.com
Tial wastegate - www.atp-turbo.com
Greddy BOV - www.atp-turbo.com
CFK 911 style fan shroud - www.remmelemotorsport.com
OEM 911 fan ring
911 repro fan - www.vertexauto.com
Autotune.fi ECU (Megasquirt 3.57 ECU) - www.autotune.fi
Black Ops Injectors 1400cc - www.fiveomotorsport.com (currently 550cc Siemens EV14 injectors,too small)
2x 45mm dual throttlebodies - modified BMW GS1150 throtlebodies on bespoke aluminum plates for IDF pattern completely cable operated
CB performance "turbo hats" on bespoke aluminum baseplates
Water/Air Intercooler - Ebay


Chassis & Suspension:

Galvanized 1970 automatic floorpan reinforced with steel tubing and painted with Brantho Korrux 3-1. Brantho Korrux - TBS Aachen Ebay,Germany
Adjustable front beam incl. all new parts - CSP www.csp-shop.de
Porsche 944 S2 Turbo rear aluminum trailing arms - business no longer exists :(
Porsche 944 rear brake calipers + discs (for now) - from a friend
Porsche 996 Carrera front brake calipers + discs - used from www.remmelemotorsport.com
Brake caliper adapters (front) - www.remmelemotorsport.com
Porsche 944 Turbo master cylinder - Ebay
Complete front and rear Uni-ball suspension system: front Remmele/Koni coilovers, rear Remmele/Bilstein coilovers (this was his first version,now much better/more advanced shocks available)
CSP cup brace - www.csp-shop.de
CSP front beam supports - www.csp-shop.de
17" Porsche Cup 1 wheels (for now) later 19" OZ HLT or Supperleggerra wheels.
Transmission - Rancho Pro Street Plus (coming soon)

Body:

Pre´68 Epoxy front fenders 4cm wider - www.remmelemotorsport.com
Epoxy rear fenders 8cm wider - www.remmelemotorsport.com
Late model rear valance with stanced holes - www.remmelemotorsport.com
carbon fiber running boards - www.remmelemotorsport.com
epoxy front/rear bumpers for widened fenders - www.remmelemotorsport.com
BugTech race shifter black - www.bugtech.de
Speedhut instruments - www.speedhut.com
Heigo rollcage - www.heigo.de
Kerscher bespoke leather bucket seats (Recaro based) www.kerschertuning.de
Paint -code LZ5K santorin blue metallic pearl from Audi

I do still do engine work mostly custom, but I also do stock. Unfortunately if you are looking for cheap I'm not your guy.
My work is top notch, I've been doing a lot of 911 stuff lately.

http://www.914world.com/bbs2/uploads...1363360420.jpg
http://www.914world.com/bbs2/uploads...1363360624.jpg
http://www.914world.com/bbs2/uploads...1363363474.jpg
http://www.914world.com/bbs2/uploads...1363363658.jpg