4x130 using a 944 rotor and caliper... would this work?
Hello,
Im still trying to decide what to do about the brakes on my bug. I want to keep VW pattern 4x130 but would like better brakes. Now, Iv considered changing wheels, but i really dont want to, so im limited to brakes that fit under a 15" wheel. A solution i can come up with is using early 944 disks and calipers, but instead of machining the 944 hub to work on the VW spindle, I was thinking about machining a VW 4x130 drum down to work as a hub, and bolt the 944 disk to the rear of it (to keep track increase down) by drilling and tapping the VW "hub". The only issues i can think of are: 1) The offset of the disk being too far inwards 2) Drilling the 944 disk and VW "hub" in 5 or so places where they would be bolted together may weaken them? Anyone got any ideas if this would work? Thanks, Mabbo |
All times are GMT -4. The time now is 00:20. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
© www.GermanLook.net 2002-2017. All Rights Reserved