GermanLook Forums

GermanLook Forums (https://www.germanlook.net/forums/index.php)
-   German Look Tuning (https://www.germanlook.net/forums/forumdisplay.php?f=19)
-   -   My son won his bracket in his GL 1303 (https://www.germanlook.net/forums/showthread.php?t=10219)

Steve C October 5th 2009 07:19

My son won his bracket in his GL 1303
 
Hi

Just got back from an all VW 1/8th drag weekend, had to drive about 900ks each way to get there but we won our bracket.

Its a 74 x 90.5=1904cc with some stock valve V Force heads, twin 40 mm Dells, Berg sump etc

Video http://www.youtube.com/watch?v=Jl2JzcSzJ0w

Steve

Humble October 6th 2009 18:50

Very cool, congrats!

Steve C October 6th 2009 19:35

Hi

Thanks, is a stinger considered "GL", might try one next time.

Steve

chug_A_bug October 6th 2009 20:41

WAY to GO...

Chris.

NO_H2O October 6th 2009 23:52

Very cool. Party at your place.

Steve C October 7th 2009 01:03

Hi

Thanks, my son is only 17 and hes over the moon, last year at the same event he ran with an almost stock 1600, 1904cc is much more fun.

Hes busy studying for his final year 12 exams now.

Steve

Wally October 7th 2009 13:02

Congrats! Well done!

petevw October 8th 2009 13:39

Looks like everyone had a good time. Cool video congrats.

Steve C March 9th 2016 18:07

Hi

My bug will be off the road for a while so rather that have have two dead Beetles in garage I've been getting his bug back on the road, I lent him my wheels until he sorts out his own wheels. My bug crashed into my sons bug last year when I didn't put the handbrake on enough. We've fitted the same Aero mudguards as are on my car. Amazingly his car doesn't have the usual offset body like lots of Beetles have where one wheel is close to mudguard edge and the other is a fair bit off.

Steve

http://i1184.photobucket.com/albums/...z.jpg~original

http://i1184.photobucket.com/albums/...z.jpg~original

http://i1184.photobucket.com/albums/...o.jpg~original

Flintstones March 10th 2016 07:49

Quote:

Originally Posted by Steve C (Post 90210)

Looks good in white with the wheels Steve.

Steve C March 10th 2016 07:55

Thanks Dino

Steve C May 23rd 2016 04:32

We got my sons bug back on the road last week, my track wheels fitted better than the other wheels

http://i1184.photobucket.com/albums/...q.jpg~original

Gerrelt May 23rd 2016 15:50

Very nice!

Wally May 23rd 2016 16:40

Quote:

Originally Posted by Gerrelt (Post 90314)
Very nice!

Indeed!

Flintstones May 24th 2016 10:01

I'm sure you son is very happy with his car now :)

Steve C May 24th 2016 18:42

Thanks guys.

A few things to finish on it, then we start building a 2442 oxy boxer

Flintstones May 25th 2016 07:58

going the oxy, must feel like deja vu :)

Steve C May 25th 2016 18:15

Almost deju vu, cant wait to build a big nasty NA air cooled

Steve C June 21st 2018 00:27

Quick update

went to a 82 mm DPR so it will be 2332 now

on a trip to the US a few years ago I bought some Street Eliminators, 94 Mahles, 1.4 rockers FK89 cam etc, this will be a Saturday night special motor. We're also fitting a Subaru 5 speed to it.

wer'e also going dry sump

DORIGTT June 26th 2018 23:49

Sooo, DPR does it right?

Steve C August 30th 2019 23:16

1 Attachment(s)
Hi

Motor is nearly finished of, we ordered a Subarugear reverse transmission kit to suit a WB or Type 4 motor. I think the flywheel is pretty sexy.

Steve

Steve C June 21st 2020 01:17

2 Attachment(s)
Hi

My sons bug has been in storage for 12 months, got it out and one of the front brake calipers decided to stick. So were going fit the old Porsche brakes that I had on my 1302 and then my 1303.

He bought some fake 18 inch twists on eBay and had them painted Mazda soul red. We've now gone to 114.5 x 5 pattern and will fitting some cool Japanese wheels to car.

Steve

H2OSB June 21st 2020 11:38

Not sure I'd ever do it, but I'd love to bolt a upright converted T4 to a reversed Subaru 5 speed. Bucket list, I guess.

I recall that trip to the States, Steve. I never saw you buying parts(at least at the Classic) but I do recall you talking about it once you got home. That's what I call planning ahead.

Looking good!
JohnL

Steve C June 22nd 2020 00:17

Hi John

It was good to meet you and other VW people on that trip. I picked up parts from a few suppliers, one was Moore parts I think. I had CB bring the heads to the Classic.

The motor progress has slowed a little as my machinist friend passed away earlier this year, he had done almost all of the machine work on the Oxy Boxer.

I want to dowel the flywheel to the crank and not just rely on the 5 bolts to hold it on.

Wally June 22nd 2020 10:25

Quote:

Originally Posted by Steve C (Post 92217)
Hi John

I want to dowel the flywheel to the crank and not just rely on the 5 bolts to hold it on.

Imo that doesn't do much if at all. Flywheel attachment relies solely on friction of the flat surface. Thats why the high torque of the bolt come in. If you reduce the surface (i.e. puts 5 dowels in there)...
If you break the friction, no dowel is gonna help you.
Anyways, I run without dowels, just the BAS 12.9 bolts and those are loose in the chinese chro-mo flywheel holes, go figure! Holds my junk so far ;-)

YMMV though.

Steve C June 23rd 2020 23:38

Hi Wally

Interesting, the Subaru gears flywheel requires longer that normal bolts that's why I was thinking about doweling the flywheel and crank

Steve C August 31st 2020 04:57

3 Attachment(s)
I've converted my sons bug to 5 x 114.3 or 4.5 inch stud pattern

Been doing some test fitting with a 17 & 18 stager, needs to go lower

Steve C December 19th 2020 19:50

1 Attachment(s)
waiting on some new 114.3x 5 wheels to be painted we fitted up some skidders that I had for my Jap car, they off an old Chrysler 300 I believe

Steve C February 2nd 2021 04:49

3 Attachment(s)
My son had some wheels painted for his bug

17 inch Work XT7 on the front and 18 inch Yokohama AVS Model T6 on the rear

Steve C February 2nd 2021 04:50

and we have put his car on historic registration, very cheap

Steve C August 4th 2021 02:04

3 Attachment(s)
My son and I did a track day together, his car went well I had a few handling issues


All times are GMT -4. The time now is 04:08.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
© www.GermanLook.net 2002-2017. All Rights Reserved