GermanLook Forums

GermanLook Forums (https://www.germanlook.net/forums/index.php)
-   Transmissions (https://www.germanlook.net/forums/forumdisplay.php?f=13)
-   -   (Repost) G50/01 Teardown Info (https://www.germanlook.net/forums/showthread.php?t=11868)

rioprelude April 20th 2016 21:00

(Repost) G50/01 Teardown Info
 
Ended up having my G50 serviced/shortened by CMS. Here is the info I used to initially tear it down:

Here are the references I used:
Wally's G50 Post on Pelican Parts

Post on Impact Bumpers

Removed the cover:
https://lh3.googleusercontent.com/-G..._202423670.jpg

Air impact to remove the 40mm and 19mm?:
https://lh3.googleusercontent.com/-h..._132624766.jpg

Removed gear and slider:
https://lh3.googleusercontent.com/-t..._151800444.jpg

Used a Proto Puller after grinding off most of the arm material to fit under the gears:
https://lh3.googleusercontent.com/-O..._160418767.jpg

https://lh3.googleusercontent.com/-t..._155523299.jpg

https://lh3.googleusercontent.com/-5..._160240186.jpg

See some worn/flat teeth on the thin black ring attached to the gear, but they don't appear to be broken?
https://lh3.googleusercontent.com/-P..._160200232.jpg


Pulled the case off:
https://lh3.googleusercontent.com/-I..._162231298.jpg

https://lh3.googleusercontent.com/-v..._162357555.jpg

Main Gear assembly:
https://lh3.googleusercontent.com/-B..._171117153.jpg

Removed the m8 nuts holding the assembly to the case:
https://lh3.googleusercontent.com/-T..._172917876.jpg

https://lh3.googleusercontent.com/-H..._173204928.jpg

Removed Diff:
https://lh3.googleusercontent.com/-G..._174837474.jpg
https://lh3.googleusercontent.com/-e..._174916918.jpg

https://lh3.googleusercontent.com/-2..._175756614.jpg

Working on a long socket to remove the input shaft from the gear assembly:
https://lh3.googleusercontent.com/-8..._180103387.jpg


All times are GMT -4. The time now is 20:37.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
© www.GermanLook.net 2002-2017. All Rights Reserved