GermanLook Forums

GermanLook Forums (https://www.germanlook.net/forums/index.php)
-   Project Builds (https://www.germanlook.net/forums/forumdisplay.php?f=67)
-   -   Say Hi to the new GL project!! (https://www.germanlook.net/forums/showthread.php?t=7687)

Phat73VW July 10th 2006 22:51

Say Hi to the new GL project!!
 
After 12 hours of driving total she has arrived home, my new 1973 Super Beetle Sedan. When i got there i knew what to expect but not this much. Not only is she rust free and fully intact...she runs too!!!! $500 well spent i must say. All doors open smooth, windows roll up and down easily and all lights are in working order...the engine could use a slight tune up ( been non op for 3 years) but other than that she is awesome. I just need to have some time to rip off all bad parts and replace them with new ones, like fenders, door panels, etc, simple things really.


ENJOY the pics


http://fototime.com/{48A16E51-E3F5-4...D}/picture.JPG

http://fototime.com/{7301C73E-5C22-4...2}/picture.JPG

http://fototime.com/{D1A5DA84-EDAA-4...1}/picture.JPG



http://fototime.com/{053D649B-30A5-4...2}/picture.JPG

Phat73VW July 10th 2006 22:53

The plans for it are make it a daily driver, stock engine for a while because i want it to sip on gas during these high gas price times. Of course it will get some nice disc brakes, blacked out trim, all interior will be black, Maxx Struts, and 17 inch Porsche Cup wheels or twisties i am not 100% yet but heres what i want it to look like in the end.

http://fototime.com/{B79941AC-020E-4...3}/picture.JPG


http://fototime.com/{E4275FDD-BE7F-4...D}/picture.JPG

Panelfantastic July 12th 2006 21:12

Can I share in this thread too? :D


Jeff-

Phat73VW July 13th 2006 01:35

sure.... what you have to share?

Panelfantastic July 13th 2006 06:51

My next project, not as glamorus as yours...

http://pic9.picturetrail.com/VOL267/.../166480011.jpg

http://pic9.picturetrail.com/VOL267/.../166480013.jpg

http://pic9.picturetrail.com/VOL267/.../166479999.jpg



Jeff-

ricola July 13th 2006 09:29

Brian,
looks like a nice solid base car :-) You think you have high fuel prices? We are about to hit £1/litre in the UK..

Jeff,
Start a new thread, it will be a long one! What plans for the ecotec, will it fit under the decklid? paint? are those wheels on properly? brakes? Looks like it has a bright future!

Rich

Panelfantastic July 13th 2006 10:38

Rich,
Waaaayy too early to start a build thread, but you bet I will when it kicks off. I am at LEAST a year away from being able to invest in parts.

I dont have any concrete build plans yet, other than the Ecotec. I bought that used engine and ordered an adapter from KEP (pretty much my parts budget for the year :eek: ) so I can do some mock ups, trying to show some folks over at the STF what it takes to get it in a stock bodied bug. I guess I could start a thread on that part once I start mock up.

The trouble for me, and I've watched others do the same, is getting carried away with the build. If I'm gonna do this, might as well do that. Next thing you know, a simple brake upgrade turns into a tube frame balls out money pit.
Too much dreaming/designing going on right now in my brain.


Jeff-

**Forgot to add, wheels are some old 19s that are unusable. Just rolled up into the openings, no suspension in the front and swing in the rear ****

volkdent July 13th 2006 11:29

My ears were burning....carried away huh?!! Both of these should turn out pretty good is my guess.

Jason

Panelfantastic July 13th 2006 21:07

:D I wasn't pointing any fingers!

My first thought is to try and keep it simple and low cost and just focus on the Eco conversion but there's always sooooo much trick stuff being done on here that my imagination gets to cooking and I want to take it to the ultimate... deep breaths, calm down, keep it simple. :bawling:



Jeff-

56oval July 13th 2006 21:08

nice buy
 
nice buy Brian
Jeff love the wheels and I thought of using the same motor will an early deck lid close I,m moving the gearbox 75mm forward please let me know how it works out cheers Malcolm

Panelfantastic July 13th 2006 22:22

Malcolm,
Its just sitting on the floor in the pics, I'll start a whole thread once the adapter comes in and I start trying the mockup.



Jeff-

volkdent July 14th 2006 00:34

You know what I'M thinking.... Audi tranny, ecotec mid-engine,coilover conversion with double-wishbone rear end, throw in a turbo for good measure... Hey, you know Hugo might be able to shed some light on that...:D :cool: }:]

OOops,

You know there was a nasty rumour going around that Jeff was a threadjacker......He also tries to get others to join him in his online mischief.

Jason

56oval July 14th 2006 05:18

Brian its going to be hard to keep it simple all projects start out I,m just going to :agree: :laugh:

Panelfantastic July 14th 2006 09:22

Brian,
I really like the clean look of your 'vert. I'm sure now that you're doing a hard shell, it's gonna look as smooth as the pics you picked to build from. Those type of deals just don't happen in my part of the country, VWs here are completely worn into nothing or swiss cheese or both. I would love to find a commuter ride like that and build it just like you said. I paid $500 just for the shell/pan you see in the pics, it is rust free but thats about it, pretty rough all over.


Jeff-

Phat73VW July 14th 2006 12:11

Quote:

Originally Posted by 56oval
Brian its going to be hard to keep it simple all projects start out I,m just going to :agree: :laugh:

yes i know what you mean...but this car is meant to get me around while i dismantle the vert and replace some floorpan issues i have been putting on hold. So in a way im kinda fixing both of them up at the same time. and i thought having one ongoing project was a handfull:eek:


All times are GMT -4. The time now is 10:45.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
© www.GermanLook.net 2002-2017. All Rights Reserved