Questions about Ryan Hueblers ride
 

Click here for more information on this ride.

This is my ride so far. I'm a media blaster so naturaly every part going on there has been striped of its paint and repainted.

The motor I have with 44IDFs choaking it did a best of 13.2@99mph on 165 tires.You can see 3 of the slower runs it made with the stock tranny it had in it here ACTOP20.COM/Ryanh

I'm working on a FI system to really bring that motor alive along with a full roll cage being built here soon. The body was mediablasted and epoxy primered. The pan is getting new pans this weekend. I want to get ride of the torsions and replance it with some coilovers. I'm just using the stock 944 rotors for mock up, I will replace those with Zimmerman Crossed drilled units later. I'm going to order up some fiberglass fenders soon and then build my own air damn that uses linear actuators to move it up and down so It doesnt get curb rash.

I'm only 19 and a lot of this stuff is new to me, But I like what others on here are doing. This car has my full devotion and should be running around by the end of the year. I will try and keep this updated as possible. If you have any questions feel free.

I wondering whats the offset of your front wheels?I ben looking at a set of rims that are 15x7 with a 50mm offset.Did you have to narrow your beam at all for the 17x7's to fit under the beam?

I don't remember the offset off hand. The beam is stock width, with adjusters. I really should update this profile. Maybe a little later.

Almost all late model Porsche wheels that are 7" wide are 55mm offset.