GermanLook Forums

GermanLook Forums (https://www.germanlook.net/forums/index.php)
-   Members Rides (https://www.germanlook.net/forums/forumdisplay.php?f=24)
-   -   Questions about ricolas ride (https://www.germanlook.net/forums/showthread.php?t=182)

ricola January 30th 2006 15:05

It's being put on hold while I sort out my new daily driver (needed the workshop space):

http://www.ricola.co.uk/images/gtr_images/lowered_1.JPG

That's why I sold the G50....

Rich

Eatoniashoprat September 17th 2007 11:04

bumper
 
Hi Rich, On your Cabrio, What is your bumper bolted to? Is the rear apron just supported by the fenders and the bumper is bolted to that? thanks
Mike

ricola September 18th 2007 03:59

It is just hanging there at the moment, I plan to fabricate a mini framework at the back which fits around the heads, similar to how Steve C has done his..

Rich

Steve C September 18th 2007 05:53

Hi Ricola

What sort of car is your daily driver? Looks interesting.

Steve

ricola September 18th 2007 09:21

It's a Phantom GTR, the build is on my website, it is actually the original car which I rebuilt from the ground up wiht new chassis. www.phantom.uk.com is their site...

Rich

ricola November 2nd 2007 16:51

Feel like I'm going round in circles now! Scored a very low mileage short nose G50 with LSD and all the other bits from the same car, hoping to squeeze it all in under the back seat...

Wally November 2nd 2007 18:04

That is a really nice find!!
Its my ultimate track tranny for sure... Just recently found out on a track day I could really use a LSD.

ricola January 15th 2010 15:21

Couple of more up to date threads of my progress...

Volkszone:
http://www.volkszone.co.uk/VZi/showthread.php?t=544689

Aussieveedubber forum:
http://forums.aussieveedubbers.com/v....php?tid=75812

Mainly due to higher traffic and thea fact that aussie's are more into subaru conversions...

seangfy January 16th 2010 14:20

what size tubing did you use on your radiator plumbing thanks

ricola January 16th 2010 18:10

32mm OD (1 1/4")

seangfy January 16th 2010 21:07

thanks alot i thought that i was going to need much bigger tubing but that must be a good size thanks again.

ricola January 17th 2010 07:10

I've used 28mm in the past with no problems too. I only went bigger to better match the subaru hose sizes...


All times are GMT -4. The time now is 15:58.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
© www.GermanLook.net 2002-2017. All Rights Reserved