Anyone using a CAE shifter ?
I bought a CAE shifter years ago and now am getting ready to install it. I have no instructions and the only one I have seen on line shows the center tunnel cut down and made flat for the install. If you have done it please post some pictures.
Thanks |
Hello
you don't have to cut anything, just take off all the existing tarboards of the pan to sit directly on the sheetmetal. BUT I show you what I made as I felt it makes it sit more rigid so all of the movement goes on shifting and not twisting the shifter http://imageshack.us/a/img805/7719/mu22.jpg http://imageshack.us/a/img713/6684/jcil.jpg http://imageshack.us/a/img4/30/dkn0.jpg http://imageshack.us/a/img703/9070/ad53.jpg http://imageshack.us/a/img441/6648/gvlk.jpg The shifter in the pictures is actually set the other way -the night hours are tough!- but anyway you get the point, hope it helps a little Oh I forgot you'll have to shorten the hand brake if you have any as it messes with the shifter Friendly Dimitrios |
Thank you Dimitrios! I will build that set up, looks easy enough. What is the body kit on that lower beetle? You need to show us pictures.
|
All times are GMT -4. The time now is 17:23. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
© www.GermanLook.net 2002-2017. All Rights Reserved