who is the guy
 

who is the guy and what is the web site that has the conversion for the T4 motor into a T1. it's like nextgen or something right? he has a book or manual. where can i find that or something similar. i'm gathering info as i would like a nice 2L for daily driving and a little fun on the side. where do i start?

Poor Boy, Joe Cali is the name of the guy who wrote the Next generation conversion manual. Here is one place you can buy the book. See Link Below

http://www.aircooledtechnology.com/s...cat=317&page=1

I'm sure you can get it straight from Joe... just google "Joe Cali", or "Next Generation" and you should find his web site. He also has a section on Jake Raby's new forums. If your going T4 you should join this forum also, great info on here. See Link Below

http://forums.aircooledtechnology.com/

poor boy,

you definitely need to visit the forums over at aircooled technologies that is the place to be.

Jamie

thanks for all the information! i'll be looking over the next week.

Jake Raby makes some great parts to help with the T4 into T1 also.

You might look at the German-saco website too. I think they still make a shroud for this.

german-saco?? do you have the site? i know of jake raby's stuff, wanting to start reading & researching for now.

This is Joe Cali's Web site for the Type 4 conversion http://www.nextgen-usa.com/

And also check out Nate photos
http://www.aircooledtech.com/type4_upright_conversion/

As for Jake Raby he can be found here
http://www.aircooledtechnology.com/

Loads of reading on the type 4rum for this conversion as well

Cheers
Jeremy

http://www.germanauto-saco.com/

they still show their fiberglass fan shroud on the site.

http://www.dolphinsci.com/typeIV.html

this page has some pretty good info.

http://www.tunacan.net/t4/

This one gives alot of info with pics and links. BTW if I remember the first motor pic on his site has the German-saco style shroud.