|
Hi dasdubber,
I am in Sydney and working out how to fit my 993 Turbo twists to a similar setup to yours. 61 beetle (cabrio) with CB spindles on a BJ IRS pan.
My wheels are 17x7 ET50 at the front and 17x8 ET55 for the rear. I will need to use spacers of about 10mm on the front. Not sure if I'll get the 8.5' wheels on the rear under the stock guards but I think that you can get 7' with and offset of ET40 on there with no spacers by just reversing one of the spring plate bolts.
Let me know how you get on.
Cheers
Steve
|