|
what are you putting them on?
i believe all 16x7 and 16x8 are ET11 and ET23 respectively for offset. i know the ones for my 951 are anyway. assuming you have a T1 of some type, you will not get these under stock wings without shortening everything. i have 2" and 3" wider fenders and they would be just about a perfect fit. i decided to go with 17's in the end, but almost ran a set of these and did alot of fitments.
so if you use these, plan on wider fenders or shortening front and rear. they will give i nice deep dish look though.
tires, the 951 uses 205/55 and 225/50. these are probably close to right for a T1. that is not "stretching" the front though. just becareful how far you go with that. stay within specs or you are asking for trouble. not to mention it can look funny.
hope this helps.
|