|
Rob- when the car was tilted forward did you fill the trans with oil? To check your oil level, put the car on 4 jackstands, but make it level. then pull out the fill plug on the side of the transaxle. if oil runs out, just let it flow till it stops. It was overfull. If no oil comes out, put your finger in the hole. the oil should be just up to the fill hole. The only other alternative is either a leaking nose cone seal, or a shift rod selector shaft seal. this is way up in the car but you might be able to get to it under the back seat access plate where the shift coupler is. :agree:
|