|
will 944 drive shafts...
Ok, so i have all the 944 brakes bolted up, i have the 944 stub axles, and i have some 944 drive shafts that i want to use (100mm CV joints). i noticed the 944 axles i have are a little shorter (maybe 1/2 inch) than the stock drive shafts. Will this be a problem? I assume the type 181 (VW Thing) output flanges are the ticket to doing this swap?
The only concerns i had was the length of the 944 driveshafts i have.
Thanks!
Jonathan
|