|
You cant get a drop spindle set already drilled for 5x100 for get the set blank and get your studs (press in) from a local parts house and have a machine shop drill them and press in the studs. If the set dose not have them, I would go with new bearings lines and ball joints/tie rod ends. Don't forget a good alignment.
__________________
NO_H2O
72 1302 Smack Black GL
73 Bus (2L CIS Powered)
66 Beetle, 73 Standard Beetle
72 Pinzgauer 710M
Volksport Kafer Gruppe
|