|
Well i have as 1303 as well and i fit my 17x7 wheels with a +40 offset and 5 1/2 inch back spacing with ease with CSP 4x100 disc in front and TOPLINE MAX struts. tires up fornt are 205/40/17 and rears are 235/45/17. all under stock arches and no spacers used. i have the wheels well under the arches and they dont even rub the fender at all. only the inner wheel well at a full turn rubs ever so slightly. i couldnt have asked for a better fitment. now if you plan to run a wheel thats 15x6 i would suggest just getting the drums and rotors drilled in the Porcshe bolt pattern and save yourself the half an inch or more you'd be pushing your wheels out due to the adapters. now i dont know if your car has disc in the front but i am assuming since its from europe it might have them. if you dont already have them id upgrade to disc like i did and you wont regret it. so yes the wheels you want to run should fit with ease just get the smaller diameter struts, drilled drums or rotors up front and rear from either CSP or MACHINE 7 they all have the things you'd need to pull it off. hope that helps.
__________________
BRIAN
|