Quote:
Originally Posted by danielzink
You will need to have the Porsche hubs modified to accept the VW bearings - you cannot use the Porsche bearings on the CB spindles.
|
I've used the Porsche bearings with unmodified 87 944T hubs on dropped spindles. I found that you can get 2 different sizes of bearings to fit the Porsche hub, and chose the bigger bearings (much bigger than stock VW bearings), can't remember the part #'s though.
You'd need the bearings to determine the dimensions of the spacers, but give Lanner a shout at
www.vdubcustoms.com, he'll set you up.
Sandeep