The Remmele looks ok, it is simmilar to what I had on my beetle before I had this new system made. The issues that I have with this design are that the muffler is not supported, all the weight of the muffler is supported by the heads On my design I included a bracket that attaches the muffer to the block. When the new system was installed on my beetle I had to have the pushrod tube seals renewed becasuse of the load coming off the heads. The second thing would be the pipe lengths, with the longer pipes it alows you the opertuninty to tune the lenghts, If you can get all of pipes to the same lenght or even better to the same CC capacity, then you will achieve a much smoother and efficient exhaust. On the plus side it is stainless... and that always sounds cool.
__________________
Phat cars = Skinny chicks !!!!!!!!!!!
Paul Grey
Auckland, New Zealand
paulgnz@hotmail.com
|