|
Hello!
I do not understand you mr. Lanner.
Increasing your front rotor size and piston diameter will not help your cause.
The rotor size will be the same this is OK. But if I change piston diameter of front calipers to 48 mm I will increase break power on front! ON your site you put much bigger calipers 54 mm.
So NOW my rear is 38 mm and front 40 mm. I think that I don't get everything from rear breaks. Because master cylinder first start to fulfill front calipers and then rear. So my front calipers are almost blocked and rear are not tightened as they should be! Increase of front I get better balance of front and rear!
Any I'm afraid of too soon blocking of front on panic braking!
What you think?
Tomica
|