|
guess i got a little too excited to go over and see. here is the current pricing (this is the disclaimer piece, as i assume this is why he doesn't post it on his site) as he has given it to me:
6 piece cylinder covers (fiberglass)
Alternator stand with oil fill tube and breather.
Crank pulley, billet alloy
Engine remote oil cooler bracket (Empi)
Remote oil cooler bracket (Sharpbuilt)
Dip stick bracket and tube.
Fuel pump block off plate.
Hardware and fitting instructions. $335USD
WITH
4 piece engine bay seal tin. $425
SHIPPING AIRMAIL $75
Oil cooler supports and fanshroud extension pieces $ 20
Type IV oil cooler cover and ducting $ 75
Pilot bush (mates type IV flywheel to input shaft press in no machine) $ 12
Stainless oil lines and fittings $ 95
Used fanshroud reprofiled and with oil line holes (unpainted) $ 68
so the kit, plus sealing, plus his top shroud is about $580 delivered to your door. a little more than i had hoped. but a very nice design from what i can tell. haven't heard much on the cooling factor on this one. for the money i would rather be in a DTM. but....
|