|
Thanks for the reply, but I should be a bit more clear in my need for a custom downpipe.
The turbo is mounted low, close to the passenger's side axle so the exhaust flange is pointing right at the rear brake caliper. From the flange, I need a 90 degree bend (3" CLR, it is really tight !) to the rear of the car to get the exhaust flowing under the passengers fender, where I can mount a muffler.
I have the 3" mandrel tubing, but the tubing diameter seems a bit large for the flange.
Hope I am making sense here.
Sandeep
|