Thread: Can we convert 5x130 to 5x100?
View Single Post
  #4  
Old April 6th 2006, 20:33
flat flat is offline
Moderator
  
Join Date: Dec 2002
Posts: 676
For the rear, I machined the hub for the new bolt pattern. The back of the hub was spotfaced the head of a stud. Studs were pressed in. Clearance holes had to be drilled into the rotor. 5-100 should be no problem.
__________________
www.vdubengineering.com
Instagram: vdubengineeringcanada
Reply With Quote