Quote:
|
Originally Posted by MikeVW
Are you putting the GTI subframe in or are you fabricating your own suspension? My pan is leaning up against my garage wall so if you need any specific measurements let me know. It is a 71 but should be the same as the model you are after.
Mike
|
Awesome, if you could take pics, and in paint shop draw measurements on it like width every 3 ft front to back and width points etc. legnth from back of seat brackets to fire wall, and from axle center to back of the front seat brackets etc...
I plan on welding up a corrado or MK3 GTI vr6 subframe and using A2 a arms, custom susp. mounts, and front coilovers... I started drafting some plans, but they are nothing w/o measurements...
I am also in the process of building a show/restored (bare metal) A2 3.0L vr6turbo gti, smoothed/dewired/decoolanted/depiped bay, alcantara interior (rado dash, Recaro SRD's) etc, etc... so my attention is being pulled in multiple directions...
Thanks guys!
Dave