|
They are just 44mm by 38mm heads for 103mm jugs with some port and chamber work.... oh and 12mm plugs, 8mm rocker studs, dual springs, cr-mo retainers, seats with 4 angles, some nice SS valves, a bit of welding and a couple of other tricks. I have an old Swiss chap help me out with these...very good but they (he)take a lot of time.
They are a PITA to do right, doubt if I'll do many, I'd want at least about $15-1600pr +cores, even then I still would make squat on them.
I had my site jacked a while back, who ever has that up is a bottom feeder.
Try the link at the bottom of my post.
__________________
74 914-6, six conversion in progress. Major progress, twin plug macining done and all the parts coming together for a for a hot street 3.0.
'67 kombi, 2007cc, Summer daily driver.
'67 bug, painted and waiting for assembly, Empi GTV project, 102mm Nickies, 78mm crank, SDS FI, 2.6L T4 monster in the works. Now 98% done, just need to work on the the motorcycle ITB intake.
Last edited by Mark the canuck; August 30th 2006 at 23:21.
|