|
I now have found several sources and it looks like one can do all 4 wheels for 300.00 - at least I think so and tomorrow I should have all the details. I live in Thailand so the time difference and dealing by email is a bit of a delay
My 88 - 944T calipers employ 36/40mm pistons in the front and 28/30 mm in the rear, using the scraper ring design. I have not looked for the rubber boot design as shown by wrenchride
Will report all my findings, prices, contacts etc.
My buddy here in Chiangmai is the local speciality powdercoater, and he uses phosphoric acid to strip paint.
Robert
|