|
Hey Chug,
Steve at MPS (416-252-0866) builds my engines, he can hook you up if you are looking for someone local in Etobikoke.
Basically you need to get a jug of varisol and an old container with a brush and clean the grime off that case. I would pull the old studs off first, then open and clean the oil passages and tap them for the aluminum plugs.
I was checking if the oil presure releif plunger thingy was still there, if not I have it for you. I also have more type 4 hardware and stuff if you need it, plus a nice set if vanagon square port heads that i was going to rebuild, it depends what you plan on doing with your engine.
Bry
Last edited by CLKWRK; November 15th 2006 at 11:13.
|