Quote:
Originally Posted by Veedub
So 0 offset, would only make them stick out a half inch pass the fenders?
|
I have personally not gone down this path or know of one who has. I am working with basic assumptions. With that in mind, what I said is based on what CCC's website says and assuming they are talking about no extra wiggle room involved. Then, yes, it would be a half-inch too far.
Quote:
Originally Posted by Veedub
What about rim with a et25 (being a 15x8) or et35 (15x7) different rims.
|
25mm offset with the 8-inch rims would save you nearly an extra inch than in your previous set-up.
35mm offset with the 7-inch rims would give you nearly 1-7/8 extra inches than in your previous set-up (1/2 inch for the narrower rim plus 1-3/8 inches for the 35mm offset), or an extra 7/8-inch extra over the above.