|
Mike hit it pretty much on the head. The Berg can run as much as $3500 with all the bells and whistles and at that price will be pretty much bullet proof.
901/902s came with lots of different ratios, get the number off the bottom rib of the case, it will be something like 901/??, with that number you can find out the stock ratios that came in the trans. 901s are supposed to be good for over 200 hp if you don't do a lot of standing burnouts, especially without taking the slack out of the gears first. 901s came with 3 different sizes of drive flanges for the axles (type 1 size, type 2/944/181 size and 930 size), be sure you know what you are getting. Drive flanges can be interchanged but can be hard to find by themselves. Mounting a 901 is not that difficult, read the tech article on the GL home page.
ken
|