[eugene]

I'm planing to use some GSX 750 ITB. They are 43mm. First i was going to build a 2056 but now is more like a 2230. But 43mm is probably enought. They are tapered and the top is 48mm wide. The problem are the injector holes, which are too small for the automotive injector sizes.I opened them up and i will glue in a bose of apropriate size, for the injectors to sit in. The fuel rail is from an alfa. It has the right spaceing. There are stil some pieces to be made like the rail holders and TPS mounting. The flanges will be glued on the TB to avoid warpage becouse of welding. Hope that helps.