With more research & number crunching i found the willwood mc wouldnt suit as its stroke it about 10cm LESS than vw's the biggest wilwood (1") works out about 1/2 way between the 19mm beetle & the 24mm kombi
i think ill allow for either standard vw one for mine & see how it goes
as far as i can tell the bigger mc will make pedal feel harder as its moving more capacity, that said both should work alright, just depends which one works BEST in real life, numbers arent everything in my opinion
on that note, to fit the kombi mc & stop the need for trimming the lip on the body shell at all, drop the MC 10mm on the vertical axis, after positioning it hard against the clutch mc
make a pushrod to suit, for simplisitic sake call the pushrod a 10mm bolt, cut the head off, get another & cut the head off, rotate the threaded ends to opposite directions, weld the smooth sections(on longer bolts) together, makes the pushrod
edal movement ratio exactly the same despite the drop in height
__________________
1971 Superbeetle, stripping the old stuff, getting ready for paint, then bolting on all my goodies, sorting problems by ones self is a challenge it seems, any GL beetle people in Brisbane say hi!
Its been 3yrs since i drove my dub
