Trying to wrap up fabrication so I can start body work and get paint down.
Welded in the seat mounts.
Here are the seats bolted in. Nothing super fancy, but they'll get the job done. I do have covers for them which I'll put in after paint.
I put down a second coat of Master Series on all the bare steel before welding up the rear fire wall. You can see the center section sitting there waiting to be welded in.
Center section tacked in and making a pattern for the left and right sides. All I had to do was that one pattern which worked for both sides. I overlapped the left and right steel steel sections to make the rear fire wall stiffer.
Here's all the pieces in. I still have to finish welding it up but it's in there.
Now I'm down to just adding some finishing touches. Things to do to move onto body work and paint!
1) Finish welding rear firewall.
2) Patches for the front of the heater channels
3) Line the hood scoop cut out with 1" steel to make the center of the hood more rigid.
4) Seal up rear fire wall and heater channel patch seams.
5) Battery mount. Still thinking about where to put it.
I think I can see the light at the end of the tunnel! This past week I got insurance on the bug too. Very exciting getting close to finishing.