[711302]

I'm in the process of building a 2110 for my 71 Super. The spec's are as follows.


Aluminum Dual Relief Super Case - Full Flowed
Super Race Rods 5.400" length
Maxi 26mm Full Flow Oil Pump
28mm Ultralight Lifters
Straight Cut Cam Gears
Tim's stage 2 Cylinder Head (42 x 37.5) 90.5-92 Bore
Thin Line Oil Sump - 1 1/2 qt.
Chromoly Push Rods - blank end (.035")
Super Big Bore Kit, 90.5 x 82mm
Teflon Buttons - 90.5mm pistons
Super Race Crank - 82mm Stroke
Forged Chromoly Lightweight Flywheel - 200mm
Engle W120 Cam
CB Super Stock Rocker Arm Complete Kit 1.25:1 Ratio.
1 5/8 A-1 Sidewinder exhaust
C/R 8.5:1
Mallory Unilite Distributor
Mallory Hyfire VI CDI
Mallory Promaster Coil
Dual IDF 44 Webers

My questions are:

1) What jetting should I use?

2) What spark plugs and gap?

3) What timing?

4) What Upper RPM should I set the Rev Limiter at?