Thread: Help! Axle Shaft to long for Center Cap
View Single Post
  #2  
Old February 23rd 2003, 16:56
flat flat is offline
Moderator
  
Join Date: Dec 2002
Posts: 676
Yeah, I had to trim the end of the stub axle to clear the cap. I just removed the wheel and hack-sawed the stub axle so that it was flush with the end of the axle nut. Also, I machined the cap a little to allow me to clear the nut. Good luck.
__________________
www.vdubengineering.com
Instagram: vdubengineeringcanada
Reply With Quote