Quote:
Originally Posted by cookvw
is this on a type 1 motor or a type 4 motor? reason i ask is cause go on over to thedubshop.net and he sells crank trigger kits for both type 1 & 4 that are hidden and would not be in the way of your fan or shroud. good luck.
|
Ok I will have a look thank you, the magnaspark system is a total complete ready to bolt on system, ECU, cd, loom, plug leads, coil pack, sensor, brackets, the whole unit. I have had no choice but to trim the lip off my bottom of my fan, and modify the sensor bracket, however the sensor plug is still an issue with space. it also has to work with the sensor wheel which has a trigger notch and must line up at the correct point to work, also it has the key way to fit the crank so im stuck with that position. I always research and ask questions but never thought of the fan one. Thanks Brent