|
Hello,
Maybe this helps:
conversion vw beetle brakediscs to porsche 944 brakediscs part 2
Sleeve to use the original Porsche outer bearing (measurements in millimetres)
5. Place the sleeve on the VW-spindle. This way you can use the original Porsche bearing.
6. Preheat the Porsche hub before pressing in the sleeve (fig. 4)
7. Press in the sleeve (fig. 4). The standard VW-bearing will fit into this sleeve later.
8. Now beat the sleeve in its place using a fitting pipe or similar.
9. Place the standard VW bearing in its place.
10. Put in the seal with a fitting pipe or similar.
11. Fit the wheelstuds.
Adapterplate for mounting Porsche callipers onto VW spindles
But you really need part 1 as well!
Cheers,
Richard
|