there is no magic bearing 19.050 - 50.005
or 31.075 - 60.005
but there are 19.050 - 53
and 31.075 to 62
so i shall be getting the hubs cut
-would have had to have done them anyway for the grease seal
-plus hopefully as the 19 - 53 is 22mm wide, i won't need to space them, as
the stock one is 13mm, and you need 8
-plus the rear one is a coule wider too
its good as the hub is stock to the spindle ish, not hanging out, like if i were to space it
75 quid for 4 bearings though!!!
21075 = 19.075 -53.975
15123 = 31.750 - 61.999