Straight from VdubEngineering's site...
Quote:
Incidentally, you can also use 993 rear brakes on the same early (85.5 and earlier) backing plate/caliper mount. The caliper will require a shim of about 3mm to centre it over the rotor.
|
Yes. If you use the 993 Rear calipers and rotors. You'll need the 3mm spacer.
__________________
Mike
'04 R32 Tornado Red
'02 New Beetle TDI - Daily driver
'64 Ghia - Project!!-Subaru EJ20T, MS/EDIS, 993 brakes, 914 Tranny...
|