Fairly easy.
They are just screwed to the body  With 'zebra' filler/blue on the joining surfaces... Cant be removed once stuck with 'zebra'!
Currently not ducted down to the enginebay, purely cosmetic! (I know I know).
If I was to duct it I would take an 80mm holesaw, work out exactly where the pipe would need to go (probably easiest with rear windows removed, can poke head halfway out from inside and see both sides) and drill.... Then mount the pipes down to the firewall or to the area above gearbox (air for oil coolers/intercoolers...)
Sam C
PS, Good luck trying to get a set of scoops like mine.... They are an original 60's part (empi) that was reproduced by a local company in limited numbers... I bought the last set they made 
__________________
1973 1303 (super beetle) in Jaguar British racing green,
Raby 2270, B spec gearbox, Lots of carbon fibre, Wolfrace Octane Black 17x7.5, Goodyear Eagle F1's, Kerscher suspension front and rear, kamei airdam in carbon, corbeau seats, momo millunium steering wheel.
CDT eurosport 6.5 front speakers, IDMAX 12D2 sub, rockford old school amps.
|